# Rust Tutorial : Joel

**URL:** <https://sierrawestforum.discourse.group/t/rust-tutorial-joel/109>\
**Category:** Techniques\
**Created:** [December 31, 2025, 2:17pm UTC](https://sierrawestforum.discourse.group/t/rust-tutorial-joel/109 "2025-12-31T14:17:03Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Joel](https://avatars.discourse-cdn.com/v4/letter/j/b9bd4f/32.png) [@Joel](https://sierrawestforum.discourse.group/u/Joel)\
**Post date:** [December 31, 2025, 2:17pm UTC](https://sierrawestforum.discourse.group/t/rust-tutorial-joel/109/1 "2025-12-31T14:17:03Z")

</div>

This thread was started March 22, 2025

**Joel**  
March 22 in Painting Castings  
Everybody has their favourite way of creating a rust effect and one of my favourites I learned years ago from one of Brett’s kits. I still consider the most important learning tool for fine scale modeling is one of Brett’s instruction manuals. Building his kits I’ve learned dozens of invaluable techniques. This is a weird one and it is so simple and the effect so striking I’m not sure why it os not more popular.

First a coat of flat black paint.

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/sierrawestforum/original/1X/964efe2207572c5eb97e6289b9a3dfa99b214f56.jpeg)

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/sierrawestforum/original/1X/1664bd4e3399c19bc2c6b10bca9f576df9c3912e.jpeg)

Then I use 70822 - Vallejo Model Color German Camo Black Brown and water it down a bit and slop on a coat. usually I just dip the soft brush in the paint then dip the tip[ into clean water and brush it on. I have tried many “chipping” colours in the past but this by far is the best as an undercoat for chipped paint on metal or for this effect.

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/sierrawestforum/original/1X/843694e7e3a4aae4c34b737e8f9d8a74e0bdc20f.jpeg)

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/sierrawestforum/original/1X/6a88838be8d0c66e2d886a236585614a750470f4.jpeg)

I let this dry for at least 10 minutes.  
Now onto the magic. I use Water Mixable oil paint Burnt Umber which is a nice dark brown.

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/sierrawestforum/original/1X/6d967605e83b201b9463138397adb3317349d956.jpeg)

I wear gloves at this point to avoid some mess and more importantly fingerprints  
Just a small amt works for multiple casting. I use a small 1-0 or 2-0 brush. An old one is best - this one cost 50 cents when it was new two years ago. I dab on the oil paint (not brushed just dabbed on corners and seams and random spots) I typically cover 5-10% of the surface, sometimes less.

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/sierrawestforum/original/1X/05d4db05d35a3238e155030bce3169d5f47df75d.jpeg)

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/sierrawestforum/original/1X/fe82a1253afc90163568f9c6098b130eec3321d7.jpeg)

Now I pick up my special tool for applying chalk. The worst brush I can find in my collection:

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/sierrawestforum/original/1X/ff9ce659f0da8f94f7fa672bfe312cd3a1882606.jpeg)

I dip this in various shades of chalk scrapings and blot it all over the surface. I typically start with the darker shades and then only a spot or two of each of the lighter shades.

My go to dark shades are409.5 411.5 and my fave is 370.3  
Light shades are 411.7 and 231.5

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/sierrawestforum/original/1X/435900bce05a0bc36f1150b817c4ed17a881fe6f.jpeg)

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/sierrawestforum/original/1X/be34723db2a95d6968853e2f8ec94127cc5d343a.jpeg)

Now the hardest part of this technique - you have to leave these to dry for a few days before touching them. i usually leave them for a week to make sure. This is really annoying when I rust up some styrene strips and find I need an extra to complete a model (see my Sand Car build) but I like the effect and have enough projects on the go.

Most of the time I just dust off the excess chalk after the oil paint dries. Some times I dust on a bit of dullcote for a mottled effect. If I decide to do this I place the casting on the ground and then keeping the spray can around 6’ (yes that’s six feet) above the casting I spray for a 1 second burst and then wait for the dullcoat to settle on the casting. I repeat 3-4 times per side until I get the effect I want. If you spray it directly on the casting it dissolves the chalk and washes most of the effect away.

**Comments**

**Karl.A**  
March 22  
Great tutorial Joel, and a fantastic result.  
Thanks for sharing.

**TomMich**  
March 22  
Thank you Joel! Very good information. Really provides a great effect.

**geoawelch**  
March 22  
Wonderful tutorial Joel. Thanks for taking the time to put this together.

**KKarns**  
March 22  
Nice tutorial Joel! Great way to get that 3 dimensional scaly, bubbled rust effects.

**glandesjr**  
March 22  
This is great help/advice, Joel. Love the effect you achieve so thanks for sharing how you do it.

**JenS**  
March 23  
Wow, great technique, Joel. Thanks for showing!

**vietnamseabee**  
March 23  
Great sbs…thanks, buddy  
terry

**ALCOALCO**  
March 23  
Impressive!

**Robert.G**  
March 24  
Thanks for that Joel. One can always learn !!! 😉

**Joel**  
March 24  
Thanks everyone - really no problem. I can’t take credit for the technique - Brett taught it to me I’m just illustrating it and giving more specific colours to use. Enjoy!

**kebmo**  
March 25  
nice!

**Stevepass**  
March 26  
Very nice. Thanks for sharing.

**Dwaine46**  
April 7  
Thanks for the step by step tutorial. outstanding..

**MuddyCreekRR**  
April 13  
As an alternative to the Dullcoat…I have used a workable matte chalk fixative. It "fixes " the chalk in place, dries quickly, and cures quickly too…and allows additional applications of chalk if needed or desired. And i find it doesn’t “change” the chalk in any way. It’s also fairly durable. Just an alternative.

**randyp**  
June 27  
Great tutorial. I look forward to using it on some of the castings in the mill engine and boiler house SW kit I have been workin on. Randy
